SURFACE PREPARATION
1. Clean surface of dust, oil, loose particles, and old coatings that may affect adhesion.
2. Ensure concrete has cured properly (7 days for screed, 14-28 days for structural concrete).
3. Dampen surface slightly before application. Avoid pooling water.
MIXING INSTRUCTIONS
1. Add one 25kg bag into 6.5-7.0L of clean water while mixing. Use a low-speed drill or mixer for even consistency.
2. Let mixture sit for 5-10 minutes, then remix briefly before use.
PRODUCT APPLICATION
1. Spread adhesive with a notched trowel over a workable area (approx. 1 sqm). Use 6mm notches for walls, 10mm for floors or large and heavy tiles.
2. Lay tiles firmly into place within the 20-minute open time. Do not remix dried adhesive or add extra water.
COVERAGE
• Up to 5.0 sqm for 30x30 cm tiles or smaller, using 6mm notched trowel
• Up to 2.6 sqm for up to 60x60 cm tiles, using 10mm notched trowel
• Up to 1.6 sqm for tiles larger than 60x60 cm, using 12mm notched trowel
Actual coverage may vary based on surface condition and application method.